An arc flash is defined as a hazardous explosion of energy from an electrical circuit, or a type of discharge that results from a low-impedance connection through air to ground or to another voltage ...

Register now to gain practical insights that strengthen electrical safety through smarter training, effective PPE, and impactful arc flash studies.

Part 1 of this series addresses significant updates to arc flash hazard marking requirements found in the 2026 NEC Sec. 110.16 to improve the safety of all electrical ...

An arc flash occurs due to a phase-to-ground or phase-to-phase short circuit. The extreme heat, light, and pressure blasts associated with these events make it necessary to take precautions when ...

Planned laboratory testing and model validation will focus on batteries, PV systems, converters, and other DC power sources.

Electrical environments are extremely dangerous for workers, with arc-flash hazards on the rise due to an increased demand in electricity and energy, meaning that workers are at risk now more than ...

In a typical television transmitter installation 30 years ago — at a time when big power was coming into play (three-phase, 460VAC) — power was fed from a transformer located just outside of the ...

Tri-State Generation and Transmission requires its linemen to wear flame-retardant clothing and use the proper tools and personal protective equipment when working ...

A recent survey conducted by Littelfuse reveals that arc-flash safety is a priority among plant professionals and that protection technologies such as arc-flash relays are rapidly growing in ...

Every day, an estimated five to 10 arc flash incidents occur and more than 2,000 people are hospitalized each year, according to The National Fire Protection Association (NFPA). With arc flash and ...

Arc flash is defined as an explosive release of energy caused by an electrical arc. Typically, the arc results from either a phase-to-ground or phase-to-phase fault created by many possible events.

When Ralph Lee first called attention to the threat of arc-flash explosions in the early 1980s, he noted that an electric arc between metals is four times as hot as the surface of the sun. Perhaps ...